PRODUCTS SHOW
KTA
Potassium Titanyle Arsenate (KTiOAsO4, or KTA) crystal is an excellent nonlinear optical crystal for Optical Parametric Oscillation (OPO) application. OPO devices based on KTAs are reliable tunable laser sources exhibiting high energy conversion efficiencies above 50%. In addition, KTA has a high damage threshold.
KTA crystals feature large non-linear optical and electro-optical coefficients and have significantly reduced absorption in the 3.0 - 4.0 m range. Its low dielectric constants, low loss tangent and ionic conductivities are orders of magnitude less than that of KTP.
Keywords: KTA,KTA crystal
Product Description
Potassium Titanyle Arsenate (KTiOAsO4, or KTA) crystal is an excellent nonlinear optical crystal for Optical Parametric Oscillation (OPO) application. OPO devices based on KTAs are reliable tunable laser sources exhibiting high energy conversion efficiencies above 50%. In addition, KTA has a high damage threshold.
KTA crystals feature large non-linear optical and electro-optical coefficients and have significantly reduced absorption in the 3.0 - 4.0 m range. Its low dielectric constants, low loss tangent and ionic conductivities are orders of magnitude less than that of KTP.
Physical Property:
| Crystal Structure | Orthorhombic, Point group mm2 |
| Lattice Parameters | a=13.125Å ,b=6.5716Å, c=10.786Å; Z=8 |
| Density | 3.454 g/cm3 |
| Mohs Hardness | ~ 5 |
| Melting Point | 1130°C |
| Curie Point | 880°C |
| Specific Heat | 0.687 cal/goC (25oC) |
| Dielectric Constant | eeff =42 |
| Absorption Coefficient | <0.05%/cm @1μm and 1.5μm |
| Electrical Conductivity | 0.7-3.4 x10-6s/cm (c-axis, 22oC, 2KHz) |
| Color | Colorless |
| Hygroscopic Susceptibility | No |
Optical Property:
| Transparency Range | 0.35μm ~ 5.3μm | ||
| Nonlinear Coefficients | d31=2.8 pm/V, d32=4.2 pm/V, d33=16.2 pm/V | ||
| (@1.064μm) | d24=3.2 pm/V, d15=2.3 pm/V | ||
| Electro-optical constants | r33 | r23 | r13 |
| (low frequency) | 37.5 pm/V | 15.4 pm/V | 11.5 pm |
| Sellmeier Equations | nx2 = 1.90713+1.23522l2/(λ2-0.19692)-0.01025λ2 | ||
| (λ in μm) | ny2 = 2.15912+1.00099l2/(λ2-0.21844)-0.01096λ2 | ||
| nz2 = 2.14768+1.29559l2/(λ2-0.22719)-0.01436λ2 | |||
| Refractive Indexes (@1.064μm) | nx | ny | nz |
| 1.783 | 1.7893 | 1.8679 | |
| SHG PM range | 1μm ~ 3μm | ||
| cut angle for NCPM OPO | θ | φ | |
| 90 | 0 | ||
| wavelength for NCPM OPO | Pump | Signal | Idler |
| 1064 nm | 1533 nm | 3475 nm | |
APPLICATION:
● Optical Parametric Oscillation (OPO)
● Frequency Doubling (SHG @1083nm-3789nm)
● Sum and Difference Frequency Generation (SFG)/(DFG)
● Electro-Optical Q-switch and modulation for Optical waveguides
ADVANTAGE:
● Large nonlinear optical and electro-optical coefficients
● Wide angular bandwidth and small walk-off angle
● Broad temperature and spectral bandwidth
● Low dielectric constants, loss tangent and ionic conductivities (much less than that of KTP)
● High damage threshold
● Lower absorption in the 3-4 µm spectrum range than KTP.
● Highly resistant to high intensity laser radiation.
|
Dimension Tolerance
|
W(+/-0.1)*H(+/-0.1)*L(+0.5/-0.1)mm
|
||
|
Angle Tolerance
|
+/-0.25°
|
Perpendicularity
|
≤10′
|
|
Scratch/Dig
|
20/10
|
Chamfer
|
≤0.2mmx45°
|
|
Parallelism
|
≤20″
|
Chips
|
≤0.1mm
|
|
Flatness
|
λ/10@633nm
|
Clear Aperture
|
≥90%
|
|
Wavefront distortion
|
λ/4@633nm
|
||
|
Coatings
|
C1---AR@1064(R<0.2%)&1533(R<0.5%)&3475(R<10%)
|
||
|
Damage Threshold
|
500MW/cm² (1064nm, 10ns, 10Hz)
|
||
Key words:
kta
ktioaso4
potassium titanyle arsenate
opo
opa
Product message
Related Products
Established in 2001 and located in the city of Qingdao, China. Crystech Inc. is a global supplier of Alexandrite, KTP, RTP and E-O Q-Switch, YAG crystals, Laser Optics and more.
MESSAGES
© 2022 Crystech Inc.
E-mail: sales@crystech.com
